X10 events/actions

ioBridge Connect Forums General Everything else… X10 events/actions

This topic contains 2 replies, has 2 voices, and was last updated by  kenpfeiffer02 2 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #18174

    dynamicdave
    Member

    I have purchased an IO-204, temp sensor, humidity sensor and ambient light sensor as well as an X10 smart board. I’ve setup the X10 to turn lights ON/OFF – no problem and can read the ambient light. What I’d like to do is switch a light ON/OFF via X10 depending on the light level.

    These are my actions…

    Analog Input to X10 Control: X10 L01 Off
    Module 24002092 / Ch 3 / >= 650 → Module 24002092 / Ch 4 / X10

    Analog Input to X10 Control: X10 L01 On
    Module 24002092 / Ch 3 / <= 550 → Module 24002092 / Ch 4 / X10

    Only problem is… they never trigger.

     

    Have I missed an important point???

     

    Cheers from David (Dempster)

    #18176

    dynamicdave
    Member

    If anyone reads this – don’t bother to respond as I’ve sorted out the problem.

    I should have been using the OnBoard Set of Rules (silly me).

    Works a treat now – just what I wanted.

    #18184

    I have just ordered the X10 control board. Now in looking for a compatible module. What brand did you use or do you have any recommendations. Im trying to control fans on a solar panel.

    Thanks

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.